Nema 17 Stepper Motor Bipolar L=48mm 44Ncm 0.018 deg 1.68A 2.8V with 100:1 Planetary Gearbox
- $10 Off Over $150
- $20 Off Over $300
- $35 Off Over $500
- $55 Off Over $800
- $70 Off Over $1000
- $100 Off Over $1500
- Enjoy Discount at Checkout!
- Valid Till April 30th, 2024
- Note:No coupon code needed, please place order directly!
This Nema 17 stepper motor with 48mm body and 1.68A rated current, integrated a planetary gearbox of 99.05:1 gear ratio. It's suitable for applications that with limited space but need low speed and high torque.
Electrical Specification
- Manufacturer Part Number: 17HS19-1684S-PG100
- Motor Type: Bipolar Stepper
- Step Angle: 0.018 deg
- Holding Torque without Gearbox: 44Ncm(62.31oz.in)
- Rated Current/phase: 1.68A
- Phase Resistance: 1.65ohms
- Voltage: 2.8V
- Inductance: 2.8mH ± 20%(1KHz)
Gearbox Specifications
- Gearbox Type: Planetary
- Gear Ratio: 99.05: 1
- Efficiency: 73%
- Backlash at No-load: <=1 deg
- Max.Permissible Torque: 4Nm(566oz.in)
- Moment Permissible Torque: 6Nm(850oz.in)
- Shaft Maximum Axial Load: 50N
- Shaft Maximum Radial Load: 100N
Physical Specifications
- Frame Size: 42 x 42mm
- Motor Length: 48mm
- Gearbox Length: 42.7mm
- Shaft Diameter: Φ8mm
- Shaft Length: 20mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 630g
Connection
|
A+
|
A-
|
B+
|
B-
|
|
Black
|
Green
|
Red
|
Blue
|
Resources
- Full Datasheet: 17HS19-1684S-PG100.pdf
- Torque Curve: 17HS19-1684S-PG100_Torque_Curve.pdf
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
| Gearbox Specification | |
|---|---|
| Backlash at No-load(Max.°) | 1 |
| Efficiency | 73% |
| Gear Ratio | 99.05:1 |
| Gearbox Length(mm) | 42.7 |
| Gearbox Type | Planetary |
| Max. Permissible Torque(Ncm) | 400 |
| Max. Permissible Torque(oz.in) | 566.4 |
| Moment Permissible Torque(Ncm) | 849.7 |
| Shaft Maximum Axial Load(N) | 50 |
| Shaft Maximum Radial Load(N) | 100 |
| Motor Specification | |
| Inductance(mH) | 3.2 |
| Lead Length(mm) | 500 |
| Motor Nema Size | Nema 17 |
| No. of Lead | 4 |
| Phase Resistance(ohm) | 1.8 |
| Rated Current (A) | 1.68 |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 20 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque w/o Gearbox(Ncm) | 52 |
| Holding Torque w/o Gearbox(oz.in) | 73.6 |
| Motor Length(mm) | 48 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Physical Specification | |
| Weight(g) | 600 |
anki_gmc – 22 Mar 2018
A SELLER, RECEIVED IT EARLIER THAN BEEN TOLD
John – 18 Dec 2016
Using this to make a custom lab instrument. With a driver that can micro-step this unit provides an incredible 7.8nm/step resolution. There is minimal backlash in the gearbox.
Chris Jacobs – 15 Feb 2016
The motor works great and the output shaft spins slowly as expected with such a high gear ratio. Only two concerns which prevented a 5/5 star review are that the motor did not have the standard 4 pin connector (just had 4 loose wires) and the motor is not compatible with a standard Nema 17 mount due to the gearbox attached to the front.
- Tag:
- Nema ,
- Gear Ratio ,
- Gearbox ,
- 48mm ,
- Nema 17 Gearbox ,
- Nema 17 Planetary Gearbox ,
- Nema 8 Gearbox
Oyostepper.com Site: