• Log in
  • Register
  • E-Mail:Oyostepper.com@gmail.com
0
Category

Nema 11 Closed-loop Geared Stepper Bipolar L=51mm 1.8 Deg 0.14Nm 0.67A 8.04V with 51:1 Encoder 300CPR

Nema 11 Closed-loop Geared Stepper Bipolar  L=51mm 1.8 Deg 0.14Nm 0.67A 8.04V with 51:1 Encoder 300CPR
NO.:11HS20-0674D-PG51-E22-300
Post a review
Special Offer in March 2024:
  • 5% OFF on Total Order Amount!
  • Enjoy Discount at Checkout!
  • Valid Till March 31st, 2024
  • Note:No coupon code needed, please place order directly!
Our Price:$78.37
Quantity:- +

Bulk Price:
Qty.Range(unit) Price(unit) Discount
5 $74.45 5%
10 $72.88 7%
50 $70.53 10%
100 $68.18 13%
Add To Cart

Motor Specification

  • Manufacturer Part Number: 11HS20-0674D-PG51-E22-300
  • Motor Type: Bipolar Stepper
  • Step Angle without Gearbox: 1.8 deg
  • Holding Torque without Gearbox: 0.14Nm(19.83oz.in)
  • Rated Current/phase: 0.67A
  • Phase Resistance: 12.00ohms
  • Voltage: 8.04V
  • Inductance: 6.50mH ± 20%(1KHz)
  • Number of Leads: 4
  • Lead Length: 500mm

Gearbox Specifications

  • Gearbox Type: Planetary
  • Gearbox Length: 42.7mm
  • Gear Ratio: 51.89
  • Efficiency: 73%
  • Shaft Diameter: Φ6mm
  • Shaft Length: 18mm
  • D-Cut length: 12mm
  • Backlash at No-load: <=1deg
  • Max.Permissible Torque: 4Nm(566.56oz.in)
  • Moment Permissible Torque: 6Nm(849.84oz.in)
  • Shaft Maximum Axial Load: 5N
  • Shaft Maximum Radial Load: 25N

Encoder Specification

  • Supply Voltage : 5VDC
  • Output current : ≤20mA
  • Resolution : 300cpr
  • Output Signal : 2 Channels
  • Shaft Diameter : Φ4mm
  • Output Frequency : ≤30KHz
  • Output Low Voltage: ≤0.3VDC
  • Output High Voltage: ≥3.4VDC

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!

Prev: Nema 11 Closed-loop Geared Stepper L=51mm 1.8 Deg 0.14Nm 0.67A 8.04V with14:1 Planetary Gearbox & Encoder 300CPR
Next: Nema 14 Closed-loop Geared Stepper L=34mm 1.8 Deg 0.14Nm 1A 3.20V Bipolar with 5:1 Encoder 300CPR
Motor Specification
Bipolar/Unipolar Bipolar
Holding Torque (Ncm) 14
Holding Torque (oz.in) 19.83
Inductance(mH) 6.5
Lead Length(mm) 500
Motor Nema Size Nema 11
No. of Lead 4
Phase Resistance(ohm) 12
Rated Current (A) 0.67
Shaft Diameter(mm) 6
Shaft Length(mm) 18
Step Angle(°) 1.8
Encoder Specification
Output Current(mA) 20
Output Frequency ≤30KHz
Rated Voltage(V) 5
Resolution(CPR) 300
Output Signal Channels 2 Channels
No reviews
Customer reviews Username:


E-mail:


Content:
Rank:

View History