• Log in
  • Register
  • E-Mail:Oyostepper.com@gmail.com
0
Category

1 Axis Closed loop Stepper Motor Kit 4.25 Nm(601.97 oz.in) 1.8 Deg Nema 24 Closed loop Stepper Motor & Driver

1 Axis Closed loop Stepper Motor Kit 4.25 Nm(601.97 oz.in) 1.8 Deg Nema 24 Closed loop Stepper Motor & Driver
NO.:1-OK2D42BH-24HS40
Post a review
Special Offer in March 2024:
  • 5% OFF on Total Order Amount!
  • Enjoy Discount at Checkout!
  • Valid Till March 31st, 2024
  • Note:No coupon code needed, please place order directly!
Our Price:$118.69
Quantity:- +

Bulk Price:
Qty.Range(unit) Price(unit) Discount
2 $112.76 5%
5 $110.38 7%
10 $106.82 10%
50 $103.26 13%
Add To Cart

This CNC kit included:

  • 1 x Closed Loop Stepper Driver 0~5.6A 18~70VDC for Nema 17, Nema 23, Nema 24 Stepper Motor
  • 1 x Nema 24 Closed Loop Stepper Motor 4.25Nm/601.97oz.in Encoder 1000CPR
  • 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver
  • 1 x RV-4 AWG20 1.7 m(67") Long Motor Extension Cable with GX16 Aviation Plug for Nema 23 and 24 Closed Loop Stepper Motors(Just for aviation-plug model motor)

Motor Specification

  • Manufacturer Part Number: 24HS40-5804D-E1000
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Frame Size: 60 x 60mm
  • Holding Torque: 4.25 N.m(601.97 oz.in)
  • Rated Current/phase: 5.8 A
  • Shaft Diameter: Φ8 mm
  • Full D-cut Shaft Length: 25 mm
  • Phase Resistance: 0.82 ohm
  • Inductance: 2.7 mH ± 20%(1KHz)
  • Number of Leads: 4
  • Lead Length: 300 mm
  • Driving Voltage : 5V
  • Output current : 55mA
  • Resolution : 1000ppr
  • Output Signal : 2 Channels
  • Bore Diameter : Φ8mm
  • Output Frequency : ≤1MHz
  • Running Speed : ≤5000rpm
  • IP Protection : IP20

Connection

A+
A-
B+
B-
White
Green
Blue
Black

 

Driver Specification

Model:OK2D42BH
Output Peak Current: 0~5.6A
Input Voltage: +18~70VDC (Typical 36VDC)
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~200kHz
Microstep(Steps/rev.):400~51200ppr
Encoder current:50mA
Isolation Resistance: 500MΩ
Weight:580g
Adopting new 32-bit motor control dedicated dual-core DSP chip;
Adopting advanced vector current and speed and position closed-loop control algorithms;
The static current and dynamic current ratio can be automatically set;
The motor comes with a 1000-line high-precision encoder;
Optocoupler isolated differential signal input;
The impulse response frequency can reach up to 300KHZ;
Subdivided into 16 settings (200~51200) to meet the requirements of most customers;
It has several protection functions such as overcurrent, overvoltage, overspeed, overheating, and excessive tracking error.

 

Resources

Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!

Prev: 1 Axis Closed loop Stepper Motor Kit 3.5 Nm(495.74 oz.in) 1.8 Deg Nema 24 Closed loop Stepper Motor & Driver
Next: 1 Axis Closed loop Stepper Motor Kit 5.8 Nm(821.51 oz.in) 1.8 Deg Nema 34 Closed loop Stepper Motor & Driver
CNC Kit Specification
No of Axis Single Axis
Open-loop/Closed-loop Closed-loop
Motor Specification
Holding Torque (Ncm) 425
Holding Torque (oz.in) 601.97
Inductance(mH) 2.7
Lead Length(mm) 300
Motor Nema Size Nema 24
No. of Lead 4
Phase Resistance(ohm) 0.82
Rated Current (A) 5.8
Shaft Diameter(mm) 8
Shaft Length(mm) 25
Step Angle(°) 1.8
Encoder Specification
IP Protection IP20
Output Current(mA) 55
Output Frequency ≤1
Resolution(CPR) 1000
Running Speed(rpm) ≤5000
Output Signal Channels 2 Channels
No reviews
Customer reviews Username:


E-mail:


Content:
Rank:

View History