E Series 1 Axis CNC Stepper Motor Kit 3.0Nm (425oz.in) 1.8 Degree 2 Phase Nema 23 Stepper Motor and Driver
- $10 Off Over $150
- $20 Off Over $300
- $35 Off Over $500
- $55 Off Over $800
- $70 Off Over $1000
- $100 Off Over $1500
- Enjoy Discount at Checkout!
- Valid Till September 28th, 2023
- Note:No coupon code needed, please place order directly!
This CNC kit includes:
1 x Y Series 1.0-4.2A DC20V-50V Digital Stepper Driver for Nema 17 23 24 Stepper Motor
1 x Nema 23 E-Series Stepper Motor, Bipolar, 1.8 deg, 3.0 Nm (425 oz.in), 4.2 A, 57 x 57 x 113 mm, 4 wires;
Specification:
Manufacturer Part Number: 23HE45-4204S
Number of phases: 2
Step angle: 1.8 degrees
Holding torque: 3.0 Nm (425oz.in)
Rated current/phase: 4.2A
Phase resistance: 0.9 ohms ± 10%
Inductance: 3.8mH ± 20% (1kHz)
Frame Size: 57*57mm
Body length: 113mm
Shaft Diameter: Φ10mm
Shaft Length: 24mm
D-cut shank length: 20mm
Number of leads: 4
Line length: 500mm
Weight: 1.8kg;
Connection:
|
A+
|
A-
|
B+
|
B-
|
|
BLK
|
GRN
|
RED
|
BLU
|
Driver specification:
Output Peak Current: 1.0-4.2A (0.71-3.0 RMS)
Input voltage: DC20V ~ 50V
Logic signal current: 7-15mA (typical 10mA)
Pulse input frequency: 0 - 200 kHz
Pulse width: 2.5 μS
Insulation resistance: 500MΩ
Cooling: Natural cooling or forced cooling
Environment: Avoid dust, oil mist and corrosive gases
Ambient temperature: 0－65℃
Humidity: 40% - 90% relative humidity
Operating Temperature: 50℃ MAX
Vibration: 10-50Hz/0.15mm
Storage Temperature: -20－65℃;
Resources
Data sheet: 23HE45-4204S.pdf
Torque curve: 23HE45-4204S_Torque_Curve.pdf
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
| CNC Kit Specification | |
|---|---|
| No of Axis | Single Axis |
| Open-loop/Closed-loop | Open-loop |
| Motor Specification | |
| Body Length(mm) | 113 |
| Holding Torque (Ncm) | 300 |
| Holding Torque (oz.in) | 425 |
| Inductance(mH) | 3.8 |
| Lead Length(mm) | 113 |
| Motor Nema Size | nema 23 |
| No. of Lead | 4 |
| Phase Resistance(ohm) | 0.9 |
| Rated Current (A) | 4.2 |
| Shaft Diameter(mm) | 10 |
| Shaft Length(mm) | 24 |
| Step Angle(°) | 1.8 |
| Stepper Driver Specification | |
| Max. Pulse Input(kHZ) | 200 |
| Microstep(Steps/rev.) | 400-40000 |
| Output Current(A) | 1.0 - 4.2 |
| Pulse Width(μs) | 2.5 |
| Input Voltage(V) | DC20V~50V |
Oyostepper.com Site: