400W / 600W / 750W / 1000W AC Servo Motor & Driver Kit 110V / 220V 1.27Nm-3.8Nm For CNC Engraver
400W/600W/750W/1000W AC Servo Motor & Driver Kit 110V / 220V 1.27Nm-3.8Nm For CNC And PLC Systems
Description:
1: Support pulse (5V or 24V pulse signal), analog quantity (0-10V), modbus RS485 control
2: Supports CNC and PLC systems
3: To connect to a 24V pulse signal, two 2K 1/4W resistors need to be connected in series for P+and D+, otherwise the driver will burn out;
4: The motor with brakes needs to be connected to a 24V external power supply and relay
5: Power on settings
Change P-036 to 1 (opposite direction) 0 (positive direction) motor direction conversion parameter
Change P-098 to 1 (internal enable) 0 (external enable)
Increasing the P-029 electronic gear ratio increases output speed within the motor’s rated limits.
Long press the confirm button on E-SEF to display DONE saved successfully. After setting all parameters, power off and restart.
Packing list:
1* Servo Motor ( 17 bit absolute )
1* AC Driver
1* 3Meter Encoder Cable + Power Cable
1* Control Signal Cable
2* 2K 1/4W resistance
1* RS485 Cable
.jpg "400W / 600W / 750W / 1000W AC Servo Motor & Driver Kit 110V / 220V 1.27Nm-3.8Nm For CNC Engraver")
| Technical Specifications | ||||
| Rated Voltage (V) | 220 | 220 | 220 | 220 |
| Rated Power (W) | 400 | 600 | 750 | 1000 |
| Rotor pole pairs (P) | 5 | 5 | 5 | 5 |
| Rated Torque ( Nm ) | 1.27 | 1.91 | 2.4 | 3.8 |
| Instantaneous max torque (Nm ) | 3.82 | 5.73 | 7.2 | 11.4 |
| Rated Speed / Max Speed （rpm） | 3000/6000 | 3000/6000 | 3000/5000 | 2500/3000 |
| Rated Current ( A ) | 2.8±10% | 4±10% | 4.8±10% | |
| Instantaneous Max Current (A) | 8.4±10% | 12±10% | 14.4±10% | |
| Moment Coefficient (Nm/A ) | 0.42±10% | 0.54±10% | 0.5±10% | 0.93±10% |
| Back EMF Coefficient ( X10 V/rpm) | 27.5±10% | 32.5±% | 33.2±10% | 56±10% |
| >Resistance (Ω ) | 3±10% ( 20℃ ） | 3.2± 10%（20 ℃） | 1.6 ± 10%（20 ℃） | 3±10%（20℃） |
| Inductance ( mH) | 7.8±20% ( 20℃ ) | 8.4±20% ( 20℃） | 9.5±20% （20℃） | 19±20% (20℃） |
| Moment of inertia ( X10V/rpm ) | 0.68 [0.73] ± 10% | 0.82[1.7] ± 10% | 1.72 [1.77]± 10% | 2.4[2.45]±10% |
| Max radial load ( N ) | 245 | 392 | ||
| Max axial load ( N ) | 74 | 147 | ||
| Weight ( KG) | 1.22 [1.65]± 10% | 1.4[1.7]±10% | 2.2[3]±10% | 2.71[3.36]±10% |
| Encoder Resolution | 10000ppr | |||
| Protection Structure | IP65 | |||
| Insulation class | F | |||
| Insulation Resistance | More than 20m Ω DC500V | |||
| Insulation Withstand voltage | AC 1500V 1minutes | |||
| Vibration Level | Rated A for operation | |||
| Turn Around | Forward turn command,viewed from load sid, counterclockwise (CCW) | |||
| Surroundings | Temperature -20℃ ~ 40 ℃, humidity 20% ~ 80% RH ( no condensation ) , altitude below 1000 | |||
| Temperature - 20℃ ~ 60℃, (no freezing) humidity 20% ~ 80% RH (no condensation) | ||||
| Impact Strength | 98m/S ² | |||
| Vibration Resistance | 49m/S ² | |||
| Servo Motor Specification | |
|---|---|
| Rated Power(W) | 400 / 600 / 750 / 1000 |
| Input Voltage(V) | 220 |
| Rated Speed(rpm) | 3000 / 2500 |
| Rated Torque(Nm) | 1.27 / 1.91 / 2.4 / 3.8 |
| Peak Speed(rpm) | 3.82 |
| Peak Torque(Nm) | 5.73 / 7.2 / 11.4 |
| With Brake | With brake |
| Physical Specification | |
| Body Length(mm) | 96 / 114 / 106 / 115 |
| Shaft Diameter(mm) | 14 / 19 |
| Shaft Length(mm) | 25 |
| Shaft Type | Keyway |
| Weight(g) | 1660 / 1700 / 3000 / 3360 |
