PM Stepper motor 18 Deg 1.96mN.m (0.278oz.in) 0.2A 4 Wires Φ10.25x11mm Permanent Magnet Stepper Motor
Special Offer in April 2024:
- $10 Off Over $150
- $20 Off Over $300
- $35 Off Over $500
- $55 Off Over $800
- $70 Off Over $1000
- $100 Off Over $1500
- Enjoy Discount at Checkout!
- Valid Till April 30th, 2024
- Note:No coupon code needed, please place order directly!
Our Price:$6.62
Electrical Specification
- Manufacturer Part Number: 10PM20L02
- Motor Type: PM Stepper
- Phase: 2
- Step Angle: 18 deg
- Rated Current/phase: 0.2 A
- Holding Torque: 1.96 mN.m(0.278 oz.in)
- Detent Torque: 0.98 mN.m(0.139 oz.in)
- Phase Resistance: 26 ± 7% ohms(20 ℃)
- Inductance: 3.8 mH ± 20%(1KHz)
- Rotor Inertia: Less than 1.0 g.cm2
- Life: 3000h MIN(20 ℃, 100 pps)
Physical Specification
- Frame Size: Φ10.25 mm
- Body Length: 11 mm
- Shaft Diameter: Φ1.5 mm
- Shaft Length: 7 mm
- Number of Leads: 4 with connector Molex-4Y
- Lead Length: 100 mm
- Weight: 5.5 g
Connection
|
A+
|
A-
|
B+
|
B-
|
|
Red
|
Black
|
Brown
|
Orange
|
Resources
- Full Datasheet: 10PM20L02.pdf
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
| Electrical Specification | |
|---|---|
| Holding Torque (Ncm) | 1.96 |
| Holding Torque (oz.in) | 0.278 |
| Inductance(mH) | 3.8 |
| Phase Resistance(ohm) | 26 |
| Rated Current (A) | 0.2 |
| Step Angle(°) | 18 |
| No. of Phase | 2 |
| Detent Torque(mN.m) | 0.98 |
| Detent Torque(oz.in) | 0.139 |
| Physical Specification | |
| Body Length(mm) | 11 |
| Frame Size(mm) | Φ10.25 |
| Lead Length(mm) | 100 |
| Shaft Diameter(mm) | Φ1.5 |
| Shaft Length(mm) | 7 |
View History
Related Products
Oyostepper.com Site: