Stepper Motor Driver 24-50VDC 1.5A-4.5A 256 Microstep Driver M542T For 2-Phase, 4-Phase Stepper Motor(out of stock)
Features
Supply voltage up to 50DC
Output current up to 4.5A
Self-adjustment technology
Pure-sinusoidal current control technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
Used for 2-phase and 4-phase motors
Short-voltage, over-voltage, over-current protections
Electrical Specifications:
Output Peak Current: 1.5~4.5A (3.0 RMS)
Input Voltage: +24~50VDC (Typical 36VDC)
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~300kHz
Isolation Resistance: 500MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
Cooling: Natural Cooling or Forced cooling
Environment: Avoid dust, oil fog and corrosive gases
Ambient Temperature: 0℃ － 50℃
Humidity: 40%RH－90%RH
Operating Temperature:70℃ MAX
Vibration: 5.9m/s2 Max
Storage Temperature: -20℃ － 65℃
Weight: Approx.290g (10.23oz)
| Stepper Driver Specification | |
|---|---|
| Driving Voltage(V) | 24 - 50 |
| Output Current(A) | 1.5 - 4.5 |
| Microstep(Steps/rev.) | 400 - 51200 |
| Max. Pulse Input(kHZ) | 300 |
| Pulse Width(μs) | 1.5 |
| Physical Specification | |
| Weight(g) | 290 |
rvschulz – 29 May 2023
Upgraded from a combo driver setup to these on my CNC. Had to dial in the settings but once configured, the axis movement feels more controlled. Cut quality on wood and plastic looks consistent.
daiken-sel – 22 Jun 2018
Fast delivery. Item as described. Would buy from again. Thanks
2010nok7337 – 02 Jun 2018
Este motor es adecuado para mí, estoy satisfecho con su calidad, gracias.
Really thanks for your positive feedback.
Best regards.
suiyuechang – 30 May 2018
Just got this today so haven't had a chance to test it yet. First impression-looks well made and matches the photos in the listing. Packaging was intact. Will update after I've used it for a while.
