JMC Nema17 Integrated Closed Loop Stepper Motor 1.8 Deg 0.7Nm 24V 2 Phase 42 x 42mm Hybrid Servo Motor

JMC Nema17 Integrated Closed Loop Stepper Motor 1.8 Deg 0.7Nm 24V 2 Phase 42 x 42mm Hybrid Servo Motor

Integrated stepper motor with built-in encoder and driver. The system uses a 1000-line optical encoder for position feedback, which helps to correct deviations during operation.


Features:

Closed-loop control with position feedback

Error signal output

Low-speed quiet operation

Variable current control technology

Built-in protection: overcurrent, overvoltage, step-loss detection

Standard pulse/direction (PUL/DIR) and enable signal control

Compact integrated size

Status LEDs (green/red)

DIP switch or software configuration

RS232 communication interface for parameter transfer

 

Application:

Usedfor small milling machines, 3D-printers, lathes, robots, winding machines or general positioning.

Compatible with CNC controls such as Beamicon. Estlcam, Mach3, Eding and Linuxcnc.

Electrical Specifications:

Manufacturer Part Number:iHSS42-24-07

Number of Phase:2

Step Angle:1.8 deg

Step Angle Accuracy:±0.09°

Holding Torque:0.7Nm(99.12 oz.in)

Rated Current/phase:1.2A

Rated Voltage:24VDC

Power Supply:20-36VDC;

Encoder:1000line

Resistance/phase:4Ω±10%

Inductance/phase:10MH±20%

Temperature Rise Max:80℃

Rotor Inertia:77g.cm²

Dielectric Strength:500VDC

Insulation Resistance:100MOHM (500VDC);

Radial Play:Max 0.025mm (load 450g);

Axial Play:Max 0.075mm (load 920g);

Insulation Class:B

Physical Specifications:

Frame Size: 42 x 42mm

Body Length:76mm

Shaft Length:24 mm

Shaft Diameter: Φ5 mm

D-cut Length:15mm

Weight: 0.6kg;