4 Axis TB6560 CNC Kit 1.26Nm(178.5oz.in) 1.8 Deg Nema 23 Stepper Motor & Driver

This CNC kit included:

1 x 4 Axis TB6560 CNC Stepper Motor Driver Board

4 x 1.26Nm (178.4oz.in) of Nema 23 Stepper Motor

1 x 250W 24V 10A 115/230V Switching Power Supply

1 x DB25 Parallel Cable & Manual CD

4 Axis TB6560 CNC Driver Board

Features:

Driver: Toshiba TB6560AHQ, 3.5A per axis max

Microstep: 1, 1/2, 1/8, 1/16 selectable

Supply: DC12–30V (24V recommended)

Current settings: 20%, 50%, 75%, 100% via DIP

Auto standby: half current when idle (reduces heat)

Relay: 227V 10A onboard

Isolation: 1000V DC-DC + optocouplers

Cooling: aluminum enclosure, passive

Software: MACH3, KCAM4, EMC2 (parallel port)

Protection: overload, overcurrent, overtemperature

Extras: manual control circuit onboard;

Stepper Motor

Manufacturer Part Number: 23HS22-2804S

Motor Type: Bipolar Stepper

Step Angle: 1.8 deg

Holding Torque: 1.26Nm(178.4oz.in)

Rated Current/phase: 2.8A

Voltage: 2.5V

Phase Resistance: 0.9ohms

Inductance: 2.5mH ± 20%(1KHz)

Frame Size: 57 x 57mm

Body Length: 56mm

Shaft Diameter: Φ6.35mm

Shaft Length: 21mm

Number of Leads: 4

Lead Length: 500mm

Weight: 700g

Switching Power Supply

24V DC 10A output

AC input voltage range: 90~132V/180~264VAC

115V/230V AC selected by switch

Forced air cooling by built-in DC fan

Over current, over voltage, short circuit and overheat protections

215*115*50mm (L*W*H)