Leadshine CL2C-RS57 0-7A 20-50VDC Nema 23 RS485 Closed Loop Stepper Motor Driver

Leadshine CL2C-RS57 0-7A 20-50VDC Nema 23 RS485 Closed Loop Stepper Motor Driver

Modbus RTU closed-loop stepper driver with RS485 (up to 31 axes), 16-segment position table, teaching mode, and profile position/velocity/homing. Closed-loop encoder feedback for position maintenance; built-in motion profiles for standalone point-to-point control.

Specifications:

Model: CL2C-RS57

Output peak current: 0–7A

Input voltage: +20–50VDC (24V or 36V typical)

Logic signal current: 5–15mA (10mA typical)

Single-ended input signal: +12–24VDC (24V typical)

Single-ended input frequency: 10 kHz max

Overvoltage protection: 90 VDC max

Output signal logic current: 100mA max

Output signal pull-up voltage: 30 VDC max

Communication baud rate: 115200 bit/s (9600 bit/s typical)

Insulation resistance: 50 MΩ min

Weight: 570g

Environment:

Cooling: natural or forced air

Ambient temperature: 0°C to 50°C

Operating temperature: 50°C max

Humidity: 40–90% RH

Vibration: 10–55Hz / 0.15mm

Protection level: IP20

Storage temperature: -20°C to +65°C

Avoid: dust, oil mist, corrosive gases;