Short Shaft NEMA 23 Integrated Easy Servo Motor 180w 3000rpm 0.6Nm(84.98oz.in) 20-50VDC 57 x 57 mm
- 6% OFF on Total Order Amount!
- Enjoy Discount at Checkout!
- Valid Till December 3th, 2024
- Note:No coupon code needed, please place order directly!
NEMA 23 Integrated Easy Servo Motor 180w 3000rpm 0.6Nm(84.98oz.in) 20-50VDC Servo Motor - Short Shaft
iSV57T-180S integrated servo motor is a 57mm frame size brushless motor integrated with a 16bit encoder and a servo driver. At very compact size and with all components integrated, the iSV57T-180S can save mounting space, eliminate encoder connection & motor wiring time, reduce interference, and cut/reduce cable and labor costs. Integrated compact size for saving mounting space & setup time, and reducing electrical interference.
The shaft length 21mm can match PLE Series Planetary Gearbox directly.
Key Features:
Input voltage 20-50VDC, output peak current 0-6A
Step & direction command input for position control
Compatible mounting size with stepper motor
Smooth motor movement and reliable respond time
Isolated control inputs of Pulse, Direction
In-position and fault outputs to external motion controllers for complete system controls
Over voltage, over-current, and position-error protection
Electrical pecifications:
Manufacturer Part Number: iSV57T-180S
Rated Power(W): 180W
Input Voltage: +20~50VDC (Typical 36VDC)
Rated Torque(Nm/oz.in): 0.6/84.98(Nm/oz.in)
Peak Torque(Nm/oz.in): 1.5/212.46(Nm/oz.in)
Rated Speed(rpm): 3000rpm
Peak Speed(rpm): 4000rpm
Output Peak Current: 0~6A
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~300kHz
Pulse Voltage: 5v(Connect a 2K ohm resistor in series, if it is 24V)
Isolation Resistance: 100MΩ
Physical Specifications:
Frame Size: 57 x 57mm
Body Length: 148mm
Shaft Diameter: 8mm
D-cut Shaft Length: 15mm
Shaft Length: 21mm
Weight: 1.54kg
Operating Environment and other Specifications(Tj = 25C/77F):
Cooling: Natural Cooling or Forced cooling
Environment: Avoid dust, oil fog and corrosive gases
Ambient Temperature: 0℃ - 40℃
Humidity: 40%RH - 90%RH
Operating Temperature(Heat Sink): 70℃ Max
Vibration: 10-50Hz / 0.15mm
Storage Temperature: -20℃ - 65℃
Resources
Manual:iSV57T(S).pdf
Torque Curve:ISV57T-180S TorqueSpeed Curve.pdf
RS232 Adapter Cable to USB 2.0:C003
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
Servo Motor Specification | |
---|---|
Control Modes | Pulse Mode |
Rated Power(W) | 180 |
Input Voltage(V) | 20~50VDC |
Rated Speed(rpm) | 3000 |
Rated Torque(Nm) | 0.6 |
Peak Torque(Nm) | 1.5 |
With Brake | No |
Output Peak Current(A) | 0~6 |
Logic Signal Current(mA) | 7~16 |
Pulse Input Frequency(kHz) | 0~300 |
Pulse Voltage(V) | 5 |
Electrical Specification | |
Peak Speed(rpm) | 4000 |
Physical Specification | |
Body Length(mm) | 148 |
Frame Size(mm) | 57 x 57 |
Shaft Diameter(mm) | 8 |
Shaft Length(mm) | 21 |
Product Type | Integrated Motor |
IP Rating | IP40 |
- Tag:
- Small Servo Motor