JMC Nema 23 Integrated AC Servo Motor 100W 36V 0.29N.m 3.5A 3 Phase 3000RPM 57 x 57mm
JMC Nema 23 Integrated AC Servo Motor 100W 36V 0.29N.m 3.5A 3 Phase 3000RPM 57 x 57mm
IHSV57-30-10-36 Integrated AC Servo Driving Motor is integrated AC servo drive into servo motor, adopts vector control in DSP chip, features in low cost, full closed loop, all digital, low heat, small vibration, and high response, as well as includes three adjustable feedback loop control modes(postition loop, speed loop, and current loop). iHSV57 is a series of stable performance, high cost-effective motion control products.
Electrical Specifications:
Manufacturer Part Number:iHSV57-30-10-36
Number of Phase:3
No-load Speed: 4200RPM +/- 7%
Rated speed: 3000RPM +/- 7%
Rated torque: 0.29N.m(41.06 oz.in)
Rated Voltage:36V
Rated Current:3.5A
No-load Current:0.55A
Power:100W
Insulation Class:B;
Physical Specifications:
Frame Size: 57 x 57mm
Body Length:108 mm
Shaft Length:33 mm
Shaft Diameter: Φ8 mm
D-cut Length: 27 mm
Weight: 1.1kg;
.jpg "JMC servo motor with integrated driver 100 Watt and software version 6")
.jpg "JMC servo motor with integrated driver 100 Watt and software version 6")
.jpg "JMC servo motor with integrated driver 100 Watt and software version 6")
(1).jpg "JMC servo motor with integrated driver 100 Watt and software version 6")
.jpg "JMC servo motor with integrated driver 100 Watt and software version 6")
Torque diagram:
Datasheet:DS_iHSV57de_210615_rock.pdf
Manual:ihsv_v6_2020_manual.pdf
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
| Servo Motor Specification | |
|---|---|
| Rated Voltage | 36 |
| Rated Current | 0.55 |
| No-load Speed | 4200 |
| Number of Phase | 3 Phase |
| Rated Power(W) | 100 |
| Rated Speed(rpm) | 3000 |
| Rated Torque(Nm) | 0.29 |
| With Brake | Without brake |
| Physical Specification | |
| D-cut Length | 27 |
| Body Length(mm) | 108 |
| Frame Size(mm) | 57 x 57 |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 33 |
| Shaft Type | D-cut |
| Single Shaft/Dual Shaft | Single Shaft |
