Nema 14 Stepper Motor High Torque Bipolar 1.8 Deg 40Ncm (56.7oz.in) 1.5A 4.2V 35x35x52mm 4 Wires
Nema 14 Stepper Motor High Torque Bipolar 1.8 deg 40Ncm (56.7oz.in) 1.5A 4.2V 35x35x52mm 4 Wires
This Nema 14 stepper motor is the strong model in Nema 14 size motors, it with step angle 1.8deg and size 35x35x52mm. It has 4 wires, each phase draws 1.5A at 4.2V, with holding torque 40Ncm (56.7oz.in).
Electrical Specification
Manufacturer Part Number: 14HS20-1504S
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 40Ncm(56.7oz.in)
Rated Current/phase: 1.5A
Voltage:4.2V
Phase Resistance: 2.8ohms
Inductance : 3.8mH ± 20%(1KHz)
Physical Specification
Frame Size: 35 x 35mm
Body Length: 52mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 400mm
Weight: 290g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
Full Datasheet: 14HS20-1504S.pdf
Torque Curver: 14HS20-1504S Torque Curve.pdf
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 40 |
Holding Torque (oz.in) | 56.7 |
Inductance(mH) | 3.8 |
Phase Resistance(ohm) | 2.8 |
Rated Current (A) | 1.5 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 52 |
Frame Size(mm) | 35x35 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 400 |
Weight(g) | 350 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
