3 PCS Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4Wires w/h 1m Cable & Connector for 3D Printer/CNC (17HS19-2004S1)
- $10 Off Over $150
- $20 Off Over $300
- $30 Off Over $500
- $50 Off Over $800
- $60 Off Over $1000
- $80 Off Over $1500
- Enjoy Discount at Checkout!
- Valid Till May 31st, 2023
- Note:No coupon code needed, please place order directly!
3 PCS Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4Wires w/h 1m Cable & Connector(17HS19-2004S1)
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications.
It's good ideal for 3D printers, as well as CNC and robotics applications.
Electrical Specification:
Manufacturer Part Number: 17HS19-2004S1
Motor Type: Hybrid Bipolar Stepper Motor
Step Angle: 1.8 deg
Holding Torque: 59Ncm(84oz.in)
Rated Current/phase: 2.0A
Voltage: 2.8V
Phase Resistance: 1.4ohms
Inductance: 3.0mH ± 20%(1KHz)
Phase: 2
Certification: ROHS,CCC,CE,ISO
Physical Specification
Frame Size: 42 x 42mmBody Length: 47mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 390g
.png)
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar |
| Holding Torque (Ncm) | 59 |
| Holding Torque (oz.in) | 84 |
| Inductance(mH) | 3 |
| Phase Resistance(ohm) | 1.4 |
| Rated Current (A) | 2 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 48 |
| Frame Size(mm) | 42x42 |
| Lead Length(mm) | 1000 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| Shaft Type | D-Cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Weight(g) | 400 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Tag:
- CNC ,
- 3d Printer
