Nema 17 Bipolar Stepper Motor 12V 1.8 Degree 26Ncm (36.8oz.in) 0.4A 42x42x34mm 4 Wires
- $10 Off Over $150
- $20 Off Over $300
- $35 Off Over $500
- $55 Off Over $800
- $70 Off Over $1000
- $100 Off Over $1500
- Enjoy Discount at Checkout!
- Valid Till September 20th, 2024
- Note:No coupon code needed, please place order directly!
Nema 17 Bipolar Stepper Motor 12V 1.8deg 26Ncm (36.8oz.in) 0.4A 42x42x34mm 4 Wires
It with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Electrical Specification
Manufacturer Part Number: 17HS13-0404S1
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 26Ncm(36.8oz.in)
Rated Current/phase: 0.4A
Voltage: 12V
Phase Resistance: 30ohms
Inductance: 37mH ± 20%(1KHz)
Physical Specification
Frame Size: 42 x 42mm
Body Length: 34mm
Shaft Diameter: Φ5mm
Front Shaft Length: 20mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 230g
Connection
|
A+
|
A-
|
B+
|
B-
|
|
Black
|
Green
|
Red
|
Blue
|
Resources
Full Datasheet: 17HS13-0404S1.pdf
Wholesale stepper motors and wholesale stepper motor drivers online with guaranteed quality and competitive price at Oyostepper.com!
| Electrical Specification | |
|---|---|
| Bipolar/Unipolar | Bipolar |
| Holding Torque (Ncm) | 26 |
| Holding Torque (oz.in) | 36.8 |
| Inductance(mH) | 37 |
| Phase Resistance(ohm) | 30 |
| Rated Current (A) | 0.4 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 34 |
| Frame Size(mm) | 42x42 |
| Lead Length(mm) | 1000 |
| No. of Lead | 4 |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| Shaft Type | D-Cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Weight(g) | 280 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
Mr.David.K – 15 Nov 2019
Service is excellent, item received unexpectedly quickly and I’m impressed with the shockproof packing. All perfectly fits the description. performance has been quite good, it’s very responsive, does the job for my 3D printer build. I would definitely recommend this stepper motor for small projects.
- Tag:
- CNC ,
- 3d Printer ,
- Robot ,
- DIY
